Product Tips

How-to: Lilliput Auto Power-On

1. In VGA mode with your PC turned on, use the remote control and input "588998" (slowly) to come into the "factory setup" menu.
2. The screen will show "--- - - - -". Input "1270x10" where "x" is the mode you would like to choose from. 0 means the monitor will go into standby when the power is on (default), 1 will auto power-on, and 2 will go into power-off mode (most likely you want 1, so you will enter "1270110".
3. Hit any number to save and back out of the setup mode.

Looking for more programming codes? View this thread on mp3car.com forums.

NOTE: On our newer Lilliputs, when you enter the code to go to the factory setup you will be presented with an OSD rather than spaces to enter numbers (the first screen is language select). Toggle the OSD using the arrow and menu keys ON THE MONITOR and make your necessary changes.

How-to: Boot your Jetway from a USB Flash/Key Drive
(this is useful when flashing your bios)

1. Download this utility from HP. It will work on most USB flash drives.
   
2. Configure your BIOS to boot from "USB Hard Disk"
3. Save and Reboot your PC with the flash drive inserted.

NOTE: You will need a floppy image for the format. You can obtain one here.